Thumana Yaw : ဦးပဇင္းက C: drive ဘက္မွာ စိတ္ၾကိဳက္ window ႏွင့္ application ေတြ တင္ထားပါတယ္၊ System ကလဲ အေကာင္းဆံုး အေနအထားမွာ ရွိပါတယ္၊ အဲဒီ အေနအထားေလး ပ်က္သြားမွာစိုးလို႔ C: drive တစ္ခုလံုးကို image ဘဲျဖစ္ျဖစ္၊ backup ဘဲျဖစ္ျဖစ္ လုပ္ျပီး၊ window တစ္ခုခုျဖစ္ရင္ ေနာက္ထပ္ အသစ္မတင္ေတာ့ပဲ Restore ျပန္လုပ္ခ်င္တာ၊ အဲဒါ image သို႔မဟုတ္ backup လုပ္နည္းႏွင့္ Restore ျပန္လုပ္နည္းကို သိခ်င္ပါတယ္၊ အပန္းမၾကီးရင္ အခ်ိန္ရတဲ့အခါ တင္ေပးေစခ်င္ပါတယ္၊ ေက်းဇူးတင္ပါတယ္၊ လိုအင္ဆႏၵ ျပည့္ဝပါေစ။
တင္ပါ့ဘုရား ... မူရင္းအတိုင္းတင္ေပးလိုက္ပါတယ္ဘုရား... ဒါေလးကေတာ့ Creating System Repair Disc တစ္ခုဖန္တီးယူတဲ႔ နည္းလမ္းေလးပါ.... DVD အေခြလြတ္တစ္ခ်ပ္ထဲမွာ
System Repair Disc အျဖစ္ Data ေတြကို သိမ္းထားႏိုင္ပါတယ္... အေၾကာင္းအမ်ိဳးမ်ိဳးေၾကာင့္ မိမိစက္ Window မတတ္ႏိုင္တာမ်ိဳးေတြကို ရွိခဲ့ရင္ အဲ့ဒီ DVD နဲ႔ System Repair လုပ္ႏိုင္သလို Restore ပါျပန္လုပ္ေပးႏိုင္ပါတယ္...။
အကယ္၍ မိမိ စက္မွာ CD/DVD Drive မပါခဲ့ရင္ နံပါတ္ (၁) က ပံုမွာ အေပၚက Create a system image ကိုႏွိပ္ျပီး D,F,G Partition တစ္ခုခုထဲမွာ System Image ဖိုင္လ္အျဖစ္ Back Up လုပ္ယူ သိမ္းထားႏိုင္ပါတယ္... မိမိ သိမ္ထားမဲ့ Partition မွာ Data အနည္း အမ်ားေပၚမူတည္ျပီး Space လံုလံုေလာက္ေလာက္ရွိဖို႔ လိုအပ္မွာပါ...
ပံုေလးေတြနဲ႔ ရိုးရွင္းစြာ ရွင္းျပထားတာမို႔ အဆင္ေျပမယ္လို႔ ေမွ်ာ္လင့္ပါတယ္...။
ေအာက္မွာေဖၚျပထားတဲ႔ နည္းလမ္းနဲ႔ အဆင္မေျပခဲ့ရင္ Backup and Restore ျပဳလုပ္နည္းကို ဒီေနရာမွာ ပံုေလးေတြနဲ႔ တဆင့္ခ်င္းရွင္းျပထားတာကို ဆက္လက္ ေလ့လာႏိုင္ပါတယ္....။
ဒါေလးကေတာ့ Creating System Repair Disc တစ္ခုဖန္တီးယူတဲ႔ နည္းလမ္းေလးပါ.. (DVD အေခြထဲကို Burn ျပီး သိမ္းထားမွာပါ)
Creating a system repair disc
Follow these steps to create a system image:
Click Start
, and then click Control Panel
.
Under System and Security
, click Back up your computer
.
The Backup and Restore Center opens.
Click Create a system repair disc
.
Figure 1: Creating a system repair disc
Select a CD/DVD drive and insert a blank disc into the drive. Then click Create disc
.
Figure 2: Creating the disc
Windows begins creating the repair disc.
Figure 3: Creating the disc
When the repair disc is complete, click Close
. Then label your disc with the following information:
Repair disc Windows 7 64-bit
Figure 4: Labeling the disc
Store the system repair disc in a safe place.
ဒါကေတာ့ CD/DVD Drive မပါတဲ႔ စက္ေတြမွာ စက္ထဲက Partition တစ္ခုခုမွာပဲ System Image ဖိုင္လ္ကို ဖန္တီးတာပါ...။
Creating a system image
Follow these steps to create a system image:
Click Start
, and then click Control Panel
.
Under System and Security
, click Back up your computer
.
The Backup and Restore Center opens.
Click Create a system image
.
Figure 1: Creating a system image
Windows looks for available backup devices, such as a hard drive, DVD burning drive, or network drive.
Choose the location to save your system image, and then click Next
.
On a hard disk
One or more DVDs
On a network location
WARNING:Do not save the backup to the recovery partition: FACTORY_IMAGE
or Recovery
. Doing so corrupts the HP Recovery information.
Confirm the settings, and then click Start backup
.
NOTE:Make sure that you have enough blank space on the external drive or enough blank DVDs to create the system image.
Figure 2: Confirm your backup settings
Windows prepares to create the system image.
Figure 3: Preparing to create the system image
If you are backing up to DVD, label and insert a blank DVD in the DVD recorder.
Figure 4: Labeling and inserting blank media
If you are backing up to DVD and a message displays requesting to format the DVD, choose to format the DVD.
Figure 5: Formatting the media
Windows saves the system image.
Figure 6: Saving the system image
If using DVDs, when prompted, label and insert a blank DVD. Continue to
follow the on-screen instructions until the image is complete. This
might take from several minutes to several hours. Store the backup in a
safe place.
Ref: http://h10025.www1.hp.com
ဆရာဝင္းကမာၻေရ ကၽြန္ေတာ့္မွာ ဗိုင္းရပ္စ္ အက္ိုက္ခံေနရလို႔ ဝင္းဒိုး7 အသစ္တင္မလို႔ပါ။ ဒီပို႔စ္မွာ ရွင္းျပထားတဲ့အတုိင္း backup လုပ္ထားရင္ ဗိုင္းရပ္စ္ က ေသသြားမွာလား။ေက်းဇူးအထူးတင္ပါတယ္။
ReplyDelete